Logo

Update the look of your kitchen without replacing your cabinets

Ready for a completely new look in the kitchen but don't want to replace your cabinets? Then our painting service is for you!

Only 1-2 days without kitchen access

While our average project takes 4-5 days, you'll still have access to your kitchen for most of the project. We wait to mask off the appliances until right before we spray, so you won't have to eat out all week. (You still can if you want to though!)

Low Odor

Our paint coatings are water based, low odor and low VOC, meaning you won't need to leave the house or deal with lingering smells. Any odor from the painting process is typically gone after a few hours with the windows open.

Super Smooth Finish

Our topcoat goes on extremely smooth and doesn't have an orange peel texture. But it doesn't just look great. It's a super smooth surface, so your cabinets will be easy to clean.

Other paints (orange peel texture)
Koa

Grain Fill

oak grain close up

Oak and other open-grained cabinets will have the grain filled as a part of our painting process. While we can't make open-grained woods become perfectly smooth like Maple or Cherry wood, we can make the grain much less pronounced.

Scratch Resistant

Other paints

Koa

No paint is scratch proof, but ours holds up great to everyday wear and tear. You won't need to be afraid to touch your cabinets!

Available in all Sherwin Williams and Benjamin Moore Colors

We can have our topcoat tinted to any Sherwin Williams or Benjamin Moore color. Just give us the name and color code!

Our Cabinet Painting Process

1: Cleaning

All surfaces are thoroughly cleaned to remove any grease or dirt.

2: Remove Doors & Drawer Faces

Doors and drawer faces are removed and taken to our portable spray booth. The cabinet frames will be done in place.

3: Masking

The frames inside the kitchen will need to be done in place, so we mask everything off to protect your walls, floors, countertops and appliances.

completed-masking.jpg
4: Surface prep

Nail holes, gouges and other imperfections are filled and prepped for paint.

All surfaces receive a light sanding to rough up the finish and promote better adhesion for our primer and paint.

5: Prime

2 coats of our primer are applied to all surfaces.

6: Paint

2 coats of your chosen paint color are applied to all surfaces.

7: Installation and finishing touches

Masking is removed and the doors and drawer faces are reinstalled.

8: Final walkthrough

No project is complete without a walk through! The final payment is only due after the project is complete and we have you inspect it.

check-mark.png

A new way to renew

logo FIND YOUR PRICE